Biostar VP5200SS16 Administrator Guide - Page 60

3. Setup the BioStar System  Pass-through: Use this format to customize only the ID bits. During verification, if the ID is recognized, the Wiegand input string will pass through in its original form. You cannot set the parity bits or alternative values of this format. By definition, the pass-through format is useful only when the operation mode is one-to-one (1: 1). In one-to-many (1: N) mode, non-ID bits are set to 0.  Custom: With a custom format, you can define the ID bits, parity bits, and alternative values. 6. Use the Wiegand Configuration wizard to customize the Wiegand format to your specifications (see the subsections that follow for more information). 7. When you have completed making changes with the wizard, click Apply to save your changes. 3.2.13.1 Configure a 26-bit Wiegand format When you select a 26-bit format, the only thing you can customize is the FC Code: 1. After selecting the format in the wizard, click Next until you reach the Alternative Value dialog box. 2. Click the FC Code checkbox and enter a new FC Code. 3. Click Finish to close the wizard. 60 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com