Biostar VP5200SS16 Administrator Guide - Page 89

3. Setup the BioStar System BioEntry Plus iCLASS devices support 16k bit (2k Byte) and 32k bit (4k Byte) iCLASS cards. The 16k bit (2k Byte) cards are available with either 2 or 16 application areas and are organized into 237 blocks of 8 bytes each. The 32k bit (4k Byte) cards are available with either 2 or 16 application areas, plus an additional 16k user configurable memory, and are organized into 8 pages with 26 blocks of 8 bytes each. To edit the iCLASS layout: 1. From the menu bar, click Option > iCLASS Card > iCLASS Layout. This will open the iCLASS Layout dialog box. 2. Enter the following parameters of the iCLASS layout:  CIS Index Block: Select the block index to use for header information (default value is 13).  Number of Templates: Select the number of templates to include in the layout (default is 2).  Template Size: Select the number of bytes to use in the template. The default size is 382 bytes.  Template 1-4 Start Block: Enter the starting block for each fingerprint template (Template 1 default value is 19; Template 2 default value is 67). 3. To use the custom layout, click Apply to Devices and select the appropriate device numbers from the Device Tree dialog box. 4. To save your changes, click Save. Note: To reset any changes you have made, click Default. To exit the dialog box without saving changes, click Close. 89 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com