Biostar VP5200SS16 Administrator Guide - Page 233

5. Customize Settings 5.1.8.1 Operation Mode tab The Operation Mode tab allows you to customize time and various operation modes settings for BioStation T2 devices.  BioStation T2 Time - Date: Manually set the device date with a drop-down calendar. - Time: Manually set the device time. - Sync with Host PC Time: Check this box to get the time of the lcoal PC which BioStar client program is installed on. The time will be displayed in the Date and Time spin boxes right below this option and you can set the device's time to match this time by clicking Set Time. - Get Time: Get the current time displayed by the device. - Set Time: Set the time on the device.  ID Operation Mode: The drop-down lists in this area allow you to control the authentication mode by schedule. For example, you can choose a normal authentication mode for working hours and a more strict authentication mode for hours outside the normal schedule. You can specify authentication modes either by device or by user (see section 5.4.1). Unless a particular mode is specified for a user, the device authentication mode will apply. - ID + Fingerprint: Set the device to require ID plus fingerprint authorization (Always, or No Time). - ID + Password: Set the device to require ID plus password authorization (Always, or No Time). - ID + Fingerprint/Password: Set the device to require ID plus fingerprint or password authorization (Always, or No Time). 233 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com