Biostar VP5200SS16 Administrator Guide - Page 42

3. Setup the BioStar System 3. In the navigation pane, click the host device. 4. In the device pane, click the Network tab. 5. Change the RS485 serial setting by selecting Host from the Mode drop-down list. 6. Click Apply to save the change. Next, search for and add slave devices: 1. In the navigation pane, right-click the host device and click Add Device (Serial). This will open the Search and Add Device dialog box. 2. Click Next to begin the search. 3. When BioStar completes the search, click Next. 4. Select the device or devices to add by clicking the checkboxes next to the device IDs. 5. Click Add to add the device 6. Close the confirmation message that appears and click Finish to exit the wizard. 7. In the navigation pane, click the slave device. 8. In the device pane, click the Network tab. 9. Change the RS485 serial setting by selecting Slave from the Mode drop-down list. 10. Click Apply to save the change. 3.2.3 Add an RF Device Prior to BioStar 1.2, third-party RF devices connected to Suprema devices (BioStation, BioEntry Plus, BioEntry W, and BioLite Net devices), operated only as physical extensions to the Suprema devices. As of BioStar 1.2, third-party RF devices connected to Suprema devices function independently and can be associated with doors and included in zones. To add an RF device: 1. Connect the RF device to a Suprema device. 2. Ensure that the Suprema device is added to the BioStar system (see section 3.2.1). 42 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com