Biostar VP5200SS16 Administrator Guide - Page 202

5. Customize Settings - Fixed Entrance: When the "Auto" T&A mode is selected, specify when to allow entrance events by selecting a timezone (Always, Disable, or custom timezone) in the drop-down list. For more information on creating a timezone, please see section 3.7.1. - Fixed Exit Time: When the "Auto" T&A mode is selected, specify when to allow exit events by selecting a timezone (Always, Disable, or custom timezone) in the drop-down list. For more information on creating a timezone, please see section 3.7.1. - In Event Caption: Seet a caption for check-in. - Out Event Caption: Set a caption for check-out. 5.1.5.4 Input tab The input tab lists input settings you have specified for an Xpass Slim device. Buttons at the bottom of the tab allow you to add, modify, or delete input settings. To add or modify settings, you must specify them from the Input Setting dialog box. For more information about configuring input settings, see section 3.10.3.2.  Device: Select the Xpass Slim (or Secure I/O) device for which you will add or modify settings.  Port: Select an input port (Input 0, Input 1, or Tamper). For Secure I/O devices, the following options are available: Input 0, Input 1, Input 2, Input 3.  Switch: Click the radio buttons to specify the normal position of the input switch (N/O: normally open or N/C: normally closed).  Function: Select an action to associate with the input: - Not Use: The input port will not be monitored. - Generic Input: The input port will be monitored for a triggering action (events specified with "Detect Input 1-3" in the Output Setting dialog box -see section 5.1.5.5). - Emergency Open: Open doors controlled by this device. The normal door open period will be ignored and doors will remain open until an operator sends a "Close Door" command via the Door/Zone Monitoring tab (see section 4.4.1). 202 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com