Biostar VP5200SS16 Administrator Guide - Page 167
Not Use, RS485, Baudrate, Entrance Limit Setting, Timed APB min, Option 1-4, Max Number of Entrance
View all Biostar VP5200SS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
5. Customize Settings - Use: Click this radio button to enable the 100base-T connection for the device. - Not Use: Click this radio button to disable the 100base-T connection for the device. RS485 - Mode: Set the mode for a device connected via RS485 (Disable, Host, Slave, or PC Connection). - Baudrate: Set the baud rate for a device connected via RS485 (9600 to 115200). Support MTU Size setting - Devices affiliated with Black Fin support MTU Size setting. The supported packet size is between 1078 and 1514, and the default is 1514. Note: This feature is supported from the FW versions, BioEntry Plus 1.6, BioEntry W 1.2, BioLite Net 1.4, Xpass 1.3. 5.1.2.4 Access Control tab The Access Control tab allows you to customize entrance limit settings and default access groups, and T&A mode settings for a BioEntry Plus or BioEntry W device. Entrance Limit Setting - Timed APB (min): Set the duration (in minutes) that a user will be unable to regain entry to an area via the device. Once a user has gained entry, the device will reject the user's card or fingerprint authorization for the time period specified here. - Option 1-4: Click the checkbox to enable an entrance limit setting, and then specify the effective hours for the entrance limit. - Max Number of Entrance: Set the maximum number of entries allowed during the specified time limit. Default Access Group Setting: Select a default access group to be applied to new users who have not been assigned to another access group. Automatic T&A Mode Change 167 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com