Biostar VP5200SS16 Administrator Guide - Page 73
Send Email, Output Device, Output Port, Output Signal, Doors, Setup, Arm/Disarm, Setting, Read Card
View all Biostar VP5200SS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
3. Setup the BioStar System Send Email: Create an email alert to send when an alarm is activated and select recipients or email alerts. For more information about email alerts, see section 3.10.2. Output Device: Specify a device that will send an alarm signal to an external device, such as an alarm siren. Output Port: Specify the port to use for an output signal. Output Signal: Specify a type of output signal. 3.5.2.5 Configure arm and disarm settings After adding an alarm zone, you can configure the actions that will arm and disarm the zone. To configure arm and disarm settings: 1. Click Doors in the shortcut pane. 2. In the navigation pane, click the name of an alarm zone. 3. Click the Details tab in the Zone pane. 4. Click Setup to the right of Arm/Disarm Type. This will open the Arm/Disarm Setting dialog box. 5. To configure cards for arming or disarming zones: a. Select a device from the Read Device drop-down list. b. Click Read Card. The LED on the device you selected will begin to flash. c. Place the card on the device. d. When the card has been read, click Add. The card can now be used to arm or disarm devices in the alarm zone. 6. To configure device keys for arming or disarming zones (BioStation devices only): a. Select a key that will arm devices from the first drop-down list. b. Select a key that will disarm devices from the second drop-down list. 7. When you are finished configuring the arm and disarm settings, click OK. 73 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com