Biostar VP5200SS16 Administrator Guide - Page 120
Con an IP Camera
View all Biostar VP5200SS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
3. Setup the BioStar System 6. Select a device to associate the IP camera with and click OK. 7. Click Add at the bottom right of the Event List section and select an event that will trigger the IP camera to send a captured still image to the BioStar system. 8. Click Apply at the bottom right to apply the changes to the BioStar system. 3.11.3 Configure an IP Camera BioStar can control the movement of pan-tilt-zoom (PTZ) cameras. When you use an IP camera that supports the PTZ feature, you can aim it at a spot you want to surveil. To control the movement of a PTZ camera: 1. Click Device in the shortcut pane. 2. Click a PTZ camera in the navigation pane. 3. In the Camera (Setup Mode) pane, click the Setup tab. 4. Use the controls in the Pan & Tilt and the Zoom sections to aim the PTZ camera at the desired spot. 120 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com