Biostar VP5200SS16 Administrator Guide - Page 227

5. Customize Settings - Release All Alarms: Cancel alarms associated with this device. - Restart Device: Restart the device. - Disable Device: Disable the device. A disabled device will not communicate with the BioStar server or process fingerprints or card inputs. To enable communication again, an administrator must provide authentication at the device.  Schedule: Set the schedule during which the inputs will be monitored (Always, First Shift, or No Time).  Duration (ms): Set the duration (in milliseconds) an input signal must last to trigger the specified action. 5.1.7.7 Output tab The Output tab lists output settings you have specified for an X-Station device. Buttons at the bottom of the tab allow you to add, modify, or delete output settings. To add or modify settings, you must specify them from the Output Setting dialog box. For more information about configuring output settings, see section 3.10.3.1.  Device Type: Select the device type for which you will add or modify settings.  Port: select an output port (Relay 0). For Secure I/O devices, these settings are available: Relay 0 or Relay 1.  Alarm On Event: Specify settings and click Add to add the event to the Alarm On Event list. These events will activate an alarm. - Event: Select an event that will activate an alarm (Auth Success, Auth Fail, Auth Duress, Anti-passback Fail, Access Not Granted, Entrance Limited, Admin Auth Success, Tamper On, Door Opened, Door Closed, Forced Open Door, Held Open Door, Detect Input #0-3). 227 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com