Biostar VP5200SS16 Administrator Guide - Page 242

5. Customize Settings - Generic Input: The input port will be monitored for a triggering action (events specified with "Detect Input 0-3" in the Output Setting dialog box -see section 5.1.1.6). - Emergency Open: Open doors controlled by this device. The normal door open period will be ignored and doors will remain open until an operator sends a "Close Door" command via the Door/Zone Monitoring tab (see section 4.4.1). - Release All Alarms: Cancel alarms associated with this device. - Restart Device: Restart the device. - Disable Device: Disable the device. A disabled device will not communicate with the BioStar server or process fingerprints or card inputs. To enable communication again, an administrator must provide authentication at the device.  Schedule: Set the schedule during which the inputs will be monitored (Always or No Time).  Duration (ms): Set the duration (in milliseconds) an input signal must last to trigger the specified action. 5.1.8.8 Output tab The Output tab lists output settings you have specified for a BioStation T2 device. Buttons at the bottom of the tab allow you to add, modify, or delete output settings. To add or modify settings, you must specify them from the Output Setting dialog box. For more information about configuring output settings, see section 3.10.3.1.  Device Type: Select the device type for which you will add or modify settings.  Port: Select an output port (Relay 0). For Secure I/O devices, these settings are available: Relay 0 or Relay 1. 242 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com