Biostar VP5200SS16 Administrator Guide - Page 232

5. Customize Settings 5.1.7.11 Wiegand tab The Wiegand tab allows you to configure the Wiegand format for an X-Station device. Click Change Format to launch the Wiegand Configuration wizard. For more information on configuring the Wiegand format, please see section 3.2.13.  Wiegand Mode: Set the mode of Wiegand input to use when reading card ID data (Legacy or Extended). The Legacy mode will process ID data from networked devices and RF card readers in the same way (this is the typical function of previous versions of BioStar). The Extended mode will allow RF card readers to operate independently, which allows them to be associated with doors, included in zones, and leave logs with their own device IDs.  Wiegand In/Out: Assign the function of the Wiegand input or output: - Wiegand (User) In: The ID field of the Wiegand string is interpreted as a user ID. - Wiegand (Card) In: The ID field of the Wiegand string is interpreted as a card ID. - Wiegand (User) Out: Inserts the user ID of the authenticated user in the ID field of the Wiegand string. - Wiegand (Card) Out: Inserts the card ID of the authenticated user in the ID field of the Wiegand string. 5.1.8 Customize Settings for BioStation T2 Devices The sections below describe the settings available for BioStation T2 devices. Customize the way BioStation T2 devices function by changing these settings to suit your particular environment and operational needs. 232 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com