Biostar VP5200SS16 Administrator Guide - Page 169

5. Customize Settings operator sends a "Close Door" command via the Door/Zone Monitoring tab (see section 4.4.1). - Release All Alarms: Cancel alarms associated with this device. - Restart Device: Restart the device. - Disable Device: Disable the device. A disabled device will not communicate with the BioStar server or process fingerprints or card inputs. To enable communication again, an administrator must enter the master password for a BioStation device or provide authentication locally for a BioEntry Plus or BioEntry W device. - With BioStar 1.8v, LED Green Input, LED Red Input, Buzzer Input, Access Granted Input, and Access Denied Input were newly added. And these input options are available only with BioStation (FW 1.93v), BioStation T2 (FW 1.3v), FaceStation (FW 1.3v), BioEntry Plus (FW 1.6v), BioEntry W (FW 1.2v), BioLite Net (FW 1.4v), and Xpass (FW 1.3v).  Schedule: Set the schedule for the input actions (Always, Disable, or custom schedule).  Duration (ms): Set the duration (in milliseconds) an input signal must last to trigger the specified action. 5.1.2.6 Output tab The Output tab lists output settings you have specified for a BioEntry Plus or BioEntry W device. Buttons at the bottom of the tab allow you to add, modify, or delete output settings. To add or modify settings, you must specify them from the Output Setting dialog box. For more information about configuring output settings, see section 3.10.3.1.  Device Type: Select the device type for which you will add or modify settings.  Port: Select an output port (Relay 0). For Secure I/O devices, these settings are available: Relay 0 or Relay 1. 169 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com