Biostar VP5200SS16 Administrator Guide - Page 43

3. Setup the BioStar System 3. Click Device in the shortcut pane. 4. In the navigation pane, click the Suprema device name. 5. Click the Wiegand tab and specify Wiegand settings as described below. b. Select Extended in the Wiegand Mode drop-down list. c. Select Wiegand (Card) in the Wiegand Input drop-down list. d. Click Apply at the bottom of the pane. 6. In the navigation pane, right-click the BioStation device name and then click Add RF Device. Note: For more information about using your third-party RF device, consult the user guidance for the RF device. The Wiegand format must be configured properly to ensure compatibility with third-party RF devices. 3.2.4 Connect a Device via Wireless LAN Certain BioStation devices (BSTW-OC, BSTW-TC, BSRW-OC, BSRW-TC) and BioStation T2, D-Station, FaceStation support wireless LAN connections. To configure the settings for a wireless LAN connection: 1. Click Device in the shortcut pane. 2. Click a device name in the navigation pane. 3. Click the Network tab in the Device pane. 4. Select "Wireless LAN" in the Lan Type drop-down list. 5. Select one of the preset configurations in the WLAN section (Preset #1 ~ Preset #4). 43 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com