Biostar VP5200SS16 Administrator Guide - Page 46

3. Setup the BioStar System To configure a BioStation device: 1. Click Device in the shortcut pane. 2. Double-click a BioStation device name in the navigation pane. This will open a Device pane similar to the one below: 3. Configure device information on the following tabs. For an explanation of device settings, please see section 5.1.1.  Operation mode: Use this tab to set the device time or retrieve it from a host PC and adjust settings for operation modes.  Fingerprint: Use this tab to specify security, quality, matching, and timeout settings for fingerprint recognition.  Network: Use this tab to specify settings for LAN or serial connections.  Access Control: Use this tab to specify entrance limits and default access groups for an individual device.  Input: Use this tab to add, modify, or delete input settings for the device.  Output: Use this tab to add, modify, or delete output settings for the device.  Black List: Use this tab to block access through a particular card, e.g. a card which has been stolen or used by a former employee. You can use this feature only when the card mode of the device is set to 'Template on Card'. Adding a user ID or card ID denies access from the users with the matching ID or card.  Display/Sound: Use this tab to adjust display or sound settings and add background images and sounds.  T&A: Use this tab to configure time and attendance settings.  Wiegand: Use this tab to configure the Wiegand format. For more information about Wiegand formats, see section 3.2.133. 4. When you are finished configuring the device, click Apply to save your changes. 46 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com