Biostar VP5200SS16 Administrator Guide - Page 256
Biostar VP5200SS16 Manual
View all Biostar VP5200SS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
5. Customize Settings 5.1.9.7 Input tab The input tab lists input settings you have specified for a FaceStation device. Buttons at the bottom of the tab allow you to add, modify, or delete input settings. To add or modify settings, you must specify them from the Input Setting dialog box. For more information about configuring input settings, see section 3.10.3.2. Device: Select the FaceStation device for which you will add or modify settings. Port: Select an input port (Input 0, Input 1, or Tamper). For Secure I/O devices, these settings are available: Input 0, Input 1, Input 2, Input 3. Switch: Click the radio buttons to specify the normal position of the input switch (N/O: normally open or N/C: normally closed). Function: Select an action to associate with the input: - Not Use: The input port will not be monitored. - Generic Input: The input port will be monitored for a triggering action (events specified with "Detect Input 0-3" in the Output Setting dialog box -see section 5.1.1.6). - Emergency Open: Open doors controlled by this device. The normal door open period will be ignored and doors will remain open until an operator sends a "Close Door" command via the Door/Zone Monitoring tab (see section 4.4.1). - Release All Alarms: Cancel alarms associated with this device. - Restart Device: Restart the device. - Disable Device: Disable the device. A disabled device will not communicate with the BioStar server or process face or card inputs. To enable communication again, an administrator must provide authentication at the device. Schedule: Set the schedule during which the inputs will be monitored (Always or No Time). Duration (ms): Set the duration (in milliseconds) an input signal must last to trigger the specified action. 256 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com