Biostar VP5200SS16 Administrator Guide - Page 189

5. Customize Settings 5.1.4.2 Network tab The Network tab allows you to customize network and server settings for Xpass devices.  TCP/IP - Use DHCP: Click this radio button to enable the dynamic host configuration protocol (DHCP) for the device. - Not Use DHCP: Click this radio button to disable the dynamic host configuration protocol (DHCP) for this device. - IP Address: Specify an IP address for the device. - Subnet: Specify a subnet address for the device. - Gateway: Specify a network gateway. - Port: Specify a port to use for the device.  Support MTU Size setting - Devices affiliated with Black Fin support MTU Size setting. The supported packet size is between 1078 and 1514, and the default is 1514. Note: This feature is supported from the FW versions, BioEntry Plus 1.6, BioEntry W 1.2, BioLite Net 1.4, Xpass 1.3.  Server - Use: Click this radio button to use specific server settings. - Not use: Click this radio button to disable server settings. - IP Address: Specify an IP address for the BioStar server. - Time sync with Server: Check this box to synchronize the device' time with the server. The device polls for a time change on the server every one hour and its time will be synchronized with the server when the device's time and the server's time differ by more than 5 seconds.  Support 100 Base-T: This option allows you to enable or disable a fast Ethernet connection for the device. When enabled, the device will detect the Ethernet network and automatically establish the best connection. If 189 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com