Biostar VP5200SS16 Administrator Guide - Page 49
Con a BioLite Net Device
View all Biostar VP5200SS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
3. Setup the BioStar System 6. Select a command type from the drop-down list. 7. If desired, set the command card to require administrator authentication by clicking the checkbox next to the option. 8. Click Add. 3.2.7 Configure a BioLite Net Device To configure a BioLite Net device: 1. Click Device in the shortcut pane. 2. Double-click a device name in the navigation pane. This will open a Device pane similar to the one below: 3. Configure device information on the following tabs. For an explanation of device settings, see section 5.1.3. Operation mode: Use this tab to set the device time or retrieve it from a host PC, adjust settings for operation modes, and adjust options for fingerprint recognition. Fingerprint: Use this tab to specify security, quality, matching, and timeout settings for fingerprint recognition. Network: Use this tab to specify settings for LAN or serial connections. Access Control: Use this tab to specify entrance limits and access groups. Input: Use this tab to add or modify inputs to the device. Output: Use this tab to add or modify outputs from the device. 49 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com