Cisco IE-3000-8TC Administration Guide - Page 103

Block Rules Tab Settings Block Rules Tab Settings The following table describes the settings for the Blocking Rules tab. Table 10: Settings on the Block Rules tab Settings Beginning Digits Total Digits Description Enter the beginning digits of the number you want to block. The number of beginning digits must not exceed the total number of digits. The beginning digits must not exceed more than 24 characters. Note Use + (Plus) symbol as prefix for configuring E164 numbers. Enter the total number of digits in the called party number. Description Enter a description to identify the abbreviated dialing rule. Abbreviated Dialing Tab Settings The following table describes the settings for the Abbreviated Dialing tab. Table 11: Settings on the Abbreviated Dialing tab Settings Digits Dialed by User Description • Specify the beginning dial code. The beginning dial code must be specific with the dial plan. • From the drop-down list, select the number of digits to be dialed after the dial code. Final Outgoing Number • Specify the Final Outgoing number for the dial code. • From the drop-down list, specify the number of digits to be dialed apart from the dial code Description Enter a description to identify the abbreviated dialing rule. OL-27022-01 Administration Guide for Cisco Business Edition 3000, Release 8.6(4) 83