Cisco IE-3000-8TC Administration Guide - Page 357

Configuring Central Site Field Route using a custom dial plan Description Select this option to manually route the PSTN calls using a custom dial plan. You can edit the dial plan pattern. • Edit Dial Plan Patterns-Click to edit the dial plan pattern for the PSTN connection. For information about the settings on the dial plan patterns page, see Dial Plan Pattern Settings, on page 355. • Edit SPA Dial Plan-Click to edit the dial plan for the SPA connection. Note This link is not available if there is no SPA connection type configured on your system. The Edit SPA Dial Plan window allows you to set the number patterns that Cisco Business Edition matches against the called numbers received from a SPA gateway in order to determine whether to route the call. For information about the settings on the dial plan patterns page, see SPA Dial Plan Patterns, on page 358. Default Outside Dial Code Call Quality Tab From the drop-down list, select the outside dial code to use for redial and click-to-call calls from this site. Note Ensure that you select a valid connection group for this outside dial code for the PSTN calls to work correctly. Call Between Sites Information Bandwidth Between Sites Select the amount of span that you are leasing from your service provider for your Internet and intranet connectivity. Note Sites which operate with a network bandwidth less than T1 to a central site are not supported for point to point video calls. Video: Enable Video Calls Between Sites Check box to enable video calls between sites. Note Point-to-point video is not supported within the teleworker site or between the teleworker site and any other site connected to the teleworker site. OL-27022-01 Administration Guide for Cisco Business Edition 3000, Release 8.6(4) 337