Cisco IE-3000-8TC Administration Guide - Page 287

Connection Settings Setting Calling Party Selection Called Party IE Type Unknown Description Any outbound call on a gateway can send directory number information. Select which directory number is sent. Select one of the following options: • Originator-Send the directory number of the calling device. • First Redirect Number-Send the directory number of the redirecting device. • Last Redirect Number-Send the directory number of the last device to redirect the call. • First Redirect Number (External)-Send the directory number of the first redirecting device with the external phone mask applied. • Last Redirect Number (External)-Send the directory number of the last redirecting device with the external phone mask applied. Select the format for the number type in called party directory numbers. Cisco Business Edition 3000 sets the called directory number (DN) type. Cisco recommends that you do not change the default value unless you have advanced experience with dialing plans such as NANP or the European dialing plan. You may need to change the default in Europe because Cisco Business Edition 3000 does not recognize European national dialing patterns. You can also change this setting when you are connecting to a PBX that expects the called directory number to be encoded to a non-national type numbering plan. Select one of the following options: • Cisco Business Edition 3000-Use when the Cisco Business Edition 3000 sets the directory number type. • Unknown-Use when the dialing plan is unknown. • National-Use when you are dialing within the dialing plan for your country. • International-Use when you are dialing outside the dialing plan for your country. • Subscriber-Use when you are dialing a subscriber by using a shortened subscriber number. OL-27022-01 Administration Guide for Cisco Business Edition 3000, Release 8.6(4) 267