Cisco IE-3000-8TC Administration Guide - Page 329

Field Number Type Save Reset OK Cancel Digit Discard Instructions Settings Description Choose the format for the number type in called party directory numbers. Cisco Business Edition 3000 sets the called directory number (DN) type. Choose one of the following number types to use in calling. • Unknown-Use when the dialing plan is unknown. • National-Use when you are dialing within the dialing plan for your country. • International-Use when you are dialing outside the dialing plan for your country. • Subscriber-Use when you are dialing a subscriber by using a shortened subscriber number. Note Cisco recommends that you do not change the default value unless you have advanced experience with dialing plans such as NANP or the European dialing plan. You may need to change the default in Europe because Cisco Unified Communications Manager does not recognize European national dialing patterns. You can also change this setting when you are connecting to a PBX that expects the called directory number to be encoded to a non-national type numbering plan. Click Save to save the digit discard instructions to the PSTN connection. Click Reset to the previously saved digit discard instructions information for this PSTN connection. Click to save the configured digit discard instructions. Note You can modify the digit discard instructions for this PSTN connections until you click Save on the PSTN connection configuration page. Click to cancel the digit discard instructions and return to the Outbound Call Routing Information. OL-27022-01 Administration Guide for Cisco Business Edition 3000, Release 8.6(4) 309