Cisco IE-3000-8TC Administration Guide - Page 139

Mute/Volume Control 3 Phone D receives a beep tone because audio streaming is not available. 4 Phone X picks up the parked call. Phone S gets redirected to Phone X. Mute/Volume Control Mute ensures that no one on a call can hear a user when the user talks; that is, the microphone or headset is muted. Volume control allows a user to adjust the volume on the phone to make the volume louder or softer, depending on the user preference. Tip Mute/volume control are available by default. You do not need to perform any configuration tasks to make mute and volume control work. Phone Applications Phone applications are applications that display interactive content, including text and graphics, on some phones. To view the phone applications on the phone, the user must press the buttons on the phone. The following list contains typical services that may be supplied to a phone: • Weather • Stock information • Contact information • Company news • To-do lists • Personal daily schedule • Graphic menus Reach Me Anywhere Reach Me Anywhere associates other phones, such as a mobile phone, with line 1 from the desk phone of the user. Reach Me Anywhere only works for calls that occur on line 1. When a user receives a call on line 1 of the user's desk phone, the external phone rings. When the user answers the call on one of the phones, the other phone stops ringing, is disconnected, and displays a missed call message. Reach Me Anywhere also allows the user to pick up in-progress calls on the desk phone or external phone without dropping the call. Note For 3905 phones, if the handset of the deskphone is picked up when you answer the call on the mobile phone, a conference is set up between all the three phones. For 6900 series phones, a conference is set up between the phones if the BLF key on the deskphone is pressed while you answer the call on the mobile phone. The user can enable and disable Reach Me Anywhere by pressing the Mobility softkey or button on the phone. Reach Me Anywhere provides the following support: OL-27022-01 Administration Guide for Cisco Business Edition 3000, Release 8.6(4) 119