Cisco IE-3000-8TC Administration Guide - Page 40

Components of the Cisco Business Edition 3000 System Note Any changes that you make on the SPA8800 connection and phone causes the SPA8800 to reboot. Reboots for configuration changes can take several minutes to take effect. Edit SPA8800 connections from the PSTN Connections page Procedure Step 1 To edit a connection, choose Edit for that connection, as shown in the following illustration. Figure 1: Edit PSTN connections Step 2 Step 3 The Edit window appears. From this window, you can edit the Description, Direct Inward Dial (DID) Number, Line Usage fields, and Advanced Settings. Refer to Connection Type: FXO, on page 294 for information on each of these settings. Choose Save in the Edit window to save your edits. Note Any changes that you make on the SPA8800 connection and phone causes the SPA8800 to reboot. Reboots for configuration changes can take several minutes to take effect. The device reset dialog appears to notify the user that the SPA8800 device is being reset and that all calls for the associated phones and PSTN connections will be disconnected. Delete SPA8800 connections from the PSTN Connections page Procedure Step 1 Step 2 Step 3 To delete a connection, choose Delete for that connection from the PSTN Connection table. Note A warning appears for connections that are configured for Emergency Calls Only, indicating that the DID used for the connection can no longer be used as an ELIN. The deletion will not occur for Line 1 if Phone 1 is not configured, and the user will get a message saying that the port is a master port and it can be deleted only as part of the SPA8800 device deletion. In all other cases the device reset dialog will appear notifying the user that the SPA8800 device will be reset and all calls of the associated phones and PSTN connections will be disconnected. The connection is removed from the PSTN Connections list. Administration Guide for Cisco Business Edition 3000, Release 8.6(4) 20 OL-27022-01