Cisco IE-3000-8TC Administration Guide - Page 317

Connection Settings Settings FXO Port Impedance Description This field defines the desired impedance of the FXO Port. The impedance values for various countries are: • US-600 • EU (UK, Germany, Netherlands, Sweden, Norway, Italy, Spain, Portugal, Poland, and Denmark)-270+750||150nF • France-270+750||150nF • Australia-220+820||120nF • New Zealand-370+620||310nF Outbound Call Routing Information Digit Discard Instruction From the drop-down list, choose the discard digit instructions to use for outbound call routing for the PSTN connection. Choose one of the following from the drop-down list and click Save. • Automatic-Select this option to use the digit discard instructions based on the dial plan and retain the system-default behavior. • Set Manually-Select this option to customize the digit discard instructions. Click Edit to edit the digit discard instructions. The digit discard instructions that appears depend on the numbering plan that you choose from the Dial Plan drop-down list on the System Settings > Dial Plan > General tab. For information on configuring the digit discard instructions, see Digit Discard Instructions Settings, on page 308. Inbound Call Routing Information Remove all but the last From the drop-down list, select the number of digits that will be retained in the incoming called party number. Prepend the digits Enter the digits to prepend to the retained digits of the incoming called party number. Valid entries include the digits 0 through 9, the wildcard characters asterisk (*) and octothorpe (#), and the international escape character +. Note The final number (digits retained + prefix digits) must be equal in length to the extension length in the system. OL-27022-01 Administration Guide for Cisco Business Edition 3000, Release 8.6(4) 297