Cisco IE-3000-8TC Administration Guide - Page 278

PSTN Connection Settings PSTN Connection Settings Table 59: Settings on the PSTN Connections page Setting Name Description Connection Type Device Name Add PSTN Connections Information Edit Delete Add PSTN Connection Description Specifies the name of the PSTN connection. The name can include up to 37 characters in any language, but it cannot include double-quotes ("), percentage sign (%), ampersand (&), back-slash (\), or angle brackets (). Specifies the description for the PSTN connection. Specifies the connection type for the PSTN connection. Specifies the device name for the PSTN connection. Click the Edit link corresponding to the PSTN connection to edit the configuration settings. Click Show Advanced Settings or Hide Advanced Settings to view or edit the advanced settings for the PSTN connection. Click Save to save the changes. Click Reset to revert to the previous saved configuration. Click the Delete link corresponding to the PSTN connection to delete the existing connection. A warning message appears indicating that the connection will be deleted and calls through that connection will be dropped. You can choose either to delete the PSTN connection or to cancel the operation. Note Ensure that you retain minimum of one T1/E1 PSTN connection configured with the internal gateway. The media transcoding and conferencing will not work properly if all the internal gateway connections are deleted. Click Add PSTN Connection to configure a new PSTN connection. Administration Guide for Cisco Business Edition 3000, Release 8.6(4) 258 OL-27022-01