Cisco SA520-K9 Administration Guide - Page 114
Firewall Rule Configuration Examples
UPC - 882658266744
View all Cisco SA520-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Firewall Configuration Firewall Rule Configuration Examples 4 The Move Firewall Rules window opens. STEP 4 In the List of Available Firewall Rules table, check the box next the rule you want to reorder and select one of the following: • MoveUp: Moves the rule up one position. • MoveDown: Moves the rule down one position. • Move To: Moves the rule to a specified location. Enter the target index number to move the selected rule to. For example: A target index of 2 moves the rule to position 2 and moves the other rules down to position 3 in the list. STEP 5 When finished, you are returned to the IPv4 Firewall Rules page. STEP 6 Verify that the rules were reordered by choosing the appropriate source and destination the Zone drop-down menus and click Display Rules. Firewall Rule Configuration Examples Allowing Inbound Traffic to a Web Server Using the WAN IP Address Situation: You host a public web server on your DMZ. You want to allow inbound HTTP requests from any outside IP address. The inbound traffic is addressed to your WAN IP address but is directed to a web server. Solution: Create an inbound rule as follows: Parameter From Zone To Zone Service Action Source Hosts Internal IP Address External IP Address Value Insecure (WAN1) DMZ HTTP ALLOW always Any 192.168.5.2 Dedicated WAN Cisco SA500 Series Security Appliances Administration Guide 114