Cisco SA520-K9 Administration Guide - Page 70

Networking Port Management 2 - RIP-2B broadcasts data in the entire subnet. - RIP-2M sends data to multicast addresses. STEP 3 In the Authentication for RIP 2B/2M area, enter the following information: • Enabled Authentication for RIP 2B/2M: Check this box to enable authentication for RIP-2B or RIP-2M. • First Key Parameters and Second Key Parameters - MD5 Key ID: Input the unique MD-5 key ID. - MD5 Auth Key: Input the auth key for this MD5 key. - Not Valid Before: Start date of the First Key for MD5 based authentication between routers. - Not Valid After: End date of the First Key for MD5 based authentication between routers. STEP 4 Click Apply to save your settings. Port Management You can enable or disable ports, set the duplex mode and speed, and enable or disable port mirroring. Refer to the following topics. • Configuring the Ports, page 70 • Configuring SPAN (Port Mirroring), page 71 Configuring the Ports STEP 1 Click Networking > Port Management > Port Management. The Port Management window opens. STEP 2 Choose the following options for each port: • Enable: Check this box to enable the port. To disable the port, uncheck the box. By default all ports are enabled. Cisco SA500 Series Security Appliances Administration Guide 70