Cisco SA520-K9 Administration Guide - Page 193

Administration Configuring RADIUS Server Records 8 Configuring RADIUS Server Records This page allows the user to configure details of any RADIUS servers that are used for authentication. STEP 1 Click Administration> RADIUS Server. STEP 2 To add a server, click Add. Other options: Click the Edit button to edit an entry. To delete an entry, check the box and then click Delete. To select all entries, check the box in the first column of the table heading. After you click Add or Edit, the Radius Server Configuration window opens. STEP 3 Enter the following information: • Authentication Server IP Address: Enter the IP address of the authenticating Radius Server. • Authentication Port: Enter the port number on the Radius server that is used to send the Radius traffic. • Secret: Enter the shared key that is configured on the Radius server. The Secret can contain all characters except for single quote, double quote and space. • Timeout: Enter the number of seconds that the connection can exist before re-authentication is required. • Retries: Enter the number of retries for the device to re-authenticate with the Radius server. STEP 4 Click Apply to save your settings. Cisco SA500 Series Security Appliances Administration Guide 193