D-Link DGS-3200-10 Product Manual - Page 220

xStack® DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch Figure 6 - 36. Add Access Rule window for IPv4 To set the Access Rule for IP, adjust the following parameters and click Apply Parameter Description Access ID (1-100) Type in a unique identifier number for this access. This value can be set from 1 to 100. Action Select Permit to specify that the packets that match the access rule are forwarded by the Switch, according to any additional rule added (see below). Select Deny to specify that packets that match the access rule are not forwarded by the Switch and will be filtered. VLAN Name Allows the entry of a name for a previously configured VLAN. Time Range Name Tick the check box and enter the name of the Time Range settings that has been previously configured in the Time Range Settings window. This will set specific times when this access rule will be implemented on the Switch. Ports Ticking the All Ports check box will denote all ports on the Switch. To view the settings of a previously correctly configured rule, click the co rresponding Show Details button on th e CPU Access Rule List window to view the following window: Figure 6 - 37. CPU Access Rule Detail Information window for IPv4 207