D-Link DGS-3200-10 Product Manual - Page 58
SNMP Host Table, SNMP Host Table window, Parameter, Description, Host IP Address
UPC - 790069306310
View all D-Link DGS-3200-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
xStack® DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch SNMP Host Table Users can set up SNMP trap recipients for IPv4. To view the following window, click Configuration > SNMP Settings > SNMP Host Table: Figure 2 - 45. SNMP Host Table window To add a new entry to the Switch's SNMP Ho st Table, enter the information at the top of the window and then click the Apply button. To delete an existing SNMP Host Table entry, click the Delete button corresponding to the entry to delete. The following parameters can set: Parameter Description Host IP Address Type the IP address of the remote management station that will serve as the SNMP host for the Switch. SNMP Version V1 - To specify that SNMP version 1 will be used. V2c - To specify that SNMP version 2c will be used. V3-NoAuthNoPriv - To specify that the SNMP version 3 will be used, with a NoAuth-NoPriv security level. V3-AuthNoPriv - To specify that the SNMP version 3 will be used, with an Auth-NoPriv security level. V3-AuthPriv - To specify that the SNMP version 3 will be used, with an Auth-Priv security level. Community String / Type in the community string or SNMP V3 user name as appropriate. SNMP V3 User Name To implement your new settings, click Apply. 45