D-Link DGS-3200-10 Product Manual - Page 224

xStack® DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch The user may adjust the following parameters to configure a time range on the Switch: Parameter Description Range Name Hours Weekdays Enter a name of no more than 32 alphanumeric characters that will be used to identify this time range on the Switch. This range name will be used in the Access Profile table to identify the access profile and associated rule to be enabled during this time range. This parameter is used to set the time in the day that this time range is to be enabled using the following parameters:  Start Time - Use this parameter to identify the starting time of the time range, in hours, minutes and seconds, based on the 24-hour time system.  End Time - Use this parameter to identify the ending time of the time range, in hours, minutes and seconds, based on the 24-hour time system. Use the check boxes to select the corresponding days of the week that this time range is to be enabled. Tick the Select All Days check box to configure this time range for every day of the week. Click Apply to implement changes made. Currently configured entries will be displayed in the Time Range Information table in the bottom half of the window shown above. 211