D-Link DGS-3200-10 Product Manual - Page 99

xStack® DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch To enable IGMP Snooping globally on the Switch:  Click the Enabled radio button.  Click the Apply button to apply the IGMP Snooping setting. The following parameters may be viewed in the IGMP Snooping Settings window: Parameter Description VID (VLAN ID) This is the VLAN ID that, along with the VLAN Name, identifies the VLAN the user wishes to modify the IGMP Snooping Settings for. VLAN Name This is the VLAN Name that, along with the VLAN ID, identifies the VLAN the user wishes to modify the IGMP Snooping Settings for. Leave Timer This specifies the maximum amount of time in seconds between the Switch receiving a leave group message from a host, and the Switch issuing a group membership query. If no response to the membership query is received before the Leave Timer expires, the (multicast) forwarding entry for that host is deleted. The default setting is 2 seconds. Host Timeout This is the maximum amount of time in seconds allowed for a host to continue membership in a multicast group without the Switch receiving a host membership report. Default = 260. Router Timeout This is the maximum amount of time in seconds a route is kept in the forwarding table without receiving a membership report. Default = 260. State Select Enabled to implement IGMP Snooping. This field is Disabled by default. Parameter Settings Click the Edit button next to the VLAN you want to edit the IGMP Snooping parameters for. 86