D-Link DGS-3200-10 Product Manual - Page 35
DHCP Relay Agent, Information Option 82, State, Check, Policy - default ip
UPC - 790069306310
View all D-Link DGS-3200-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
xStack® DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch DHCP Relay Agent Information Option 82 State This field can be toggled between Enabled and Disabled using the drop-down menu. It is used to enable or disable the DHCP Relay Agent Information Option 82 on the Switch. The default is Disabled. Enabled -When this field is toggled to Enabled, the relay agent will insert and remove DHCP relay information (option 82 field) in messages between DHCP servers and clients. When the relay agent receives the DHCP request, it adds the option 82 information, and the IP address of the relay agent (if the relay agent is configured), to the packet. Once the option 82 information has been added to the packet it is sent on to the DHCP server. When the DHCP server receives the packet, if the server is capable of option 82, it can implement policies like restricting the number of IP addresses that can be assigned to a single remote ID or circuit ID. Then the DHCP server echoes the option 82 field in the DHCP reply. The DHCP server unicasts the reply back to the relay agent if the request was relayed to the server by the relay agent. The switch verifies that it originally inserted the option 82 data. Finally, the relay agent removes the option 82 field and forwards the packet to the switch port that connects to the DHCP client that sent the DHCP request. Disabled- When the field is toggled to Disabled, the relay agent will not insert and remove DHCP relay information (option 82 field) in messages between DHCP servers and clients, and the check and policy settings will have no effect. DHCP Relay Agent Information Option 82 Check This field can be toggled between Enabled and Disabled using the drop-down menu. It is used to enable or disable the Switches ability to check the validity of the packet's option 82 field. Enabled - When the field is toggled to Enabled, the relay agent will check the validity of the packet's option 82 field. If the switch receives a packet that contains the option 82 field from a DHCP client, the switch drops the packet because it is invalid. In packets received from DHCP servers, the relay agent will drop invalid messages. Disabled - When the field is toggled to Disabled, the relay agent will not check the validity of the packet's option 82 field. DHCP Relay Agent Information Option 82 Policy This field can be toggled between Replace, Drop, and Keep by using the drop-down menu. It is used to set the Switches policy for handling packets when the DHCP Relay Agent Information Option 82 Check is set to Disabled. The default is Replace. Replace - The option 82 field will be replaced if the option 82 field already exists in the packet received from the DHCP client. Drop - The packet will be dropped if the option 82 field already exists in the packet received from the DHCP client. Keep - The option 82 field will be retained if the option 82 field already exists in the packet received from the DHCP client. Click Apply to implement any changes that have been made. NOTE: If the Switch receives a packet that contains the option 82 field from a DHCP client and the information-checking feature is enabled, the Switch drops the packet because it is invalid. However, in some instances, users may configure a client with the option 82 field. In this situation, disable the information check feature so that the Switch does not remove the option 82 field from the packet. Users may configure the action that the Switch takes when it receives a packet with existing option 82 information by configuring the DHCP Agent Information Option 82 Policy. 22