D-Link DGS-3200-10 Product Manual - Page 95
Parameter, Description, Algorithm, Group ID, Master Port, State, Member Ports, Active Ports - lacp
UPC - 790069306310
View all D-Link DGS-3200-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
xStack® DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch The user-changeable parameters are as follows: Parameter Description Algorithm Toggle between MAC Source Dest and IP Source Dest. Group ID Type Master Port State Member Ports Active Ports Select an ID number for the group, between 1 and 5 for the DGS-3200-10, between 1 and 8 for the DGS-3200-16, and between 1 and 12 for the DGS-3200-24. This drop-down menu allows users to select between Static and LACP (Link Aggregation Control Protocol). LACP allows for the automatic detection of links in a Port Trunking Group. Choose the Master Port for the trunk group using the drop-down menu. Use the drop-down menu to toggle between Enabled and Disabled. This is used to turn a port trunking group on or off. This is useful for diagnostics, to quickly isolate a bandwidth intensive network device or to have an absolute backup aggregation group that is not under automatic control. Choose the members ports for the trunked group. Up to eight ports per group can be assigned to a group. Shows the ports that are currently forwarding packets. After setting the previous parameters, click Apply to allow your changes to be implemented. 82