Cisco WS-C3560E-48PD-SF Command Reference - Page 122

dot1x default Chapter 2 Catalyst 3560 Switch Cisco IOS Commands dot1x default Use the dot1x default interface configuration command to reset the IEEE 802.1x parameters to their default values. dot1x default Syntax Description This command has no arguments or keywords. Defaults These are the default values: • The per-port IEEE 802.1x protocol enable state is disabled (force-authorized). • The number of seconds between re-authentication attempts is 3600 seconds. • The periodic re-authentication is disabled. • The quiet period is 60 seconds. • The retransmission time is 30 seconds. • The maximum retransmission number is 2 times. • The host mode is single host. • The client timeout period is 30 seconds. • The authentication server timeout period is 30 seconds. Command Modes Interface configuration Command History Release 12.1(19)EA1 Modification This command was introduced. Examples This example shows how to reset the IEEE 802.1x parameters on a port: Switch(config-if)# dot1x default You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC command. Related Commands Command Description show dot1x [interface interface-id] Displays IEEE 802.1x status for the specified port. 2-90 Catalyst 3560 Switch Command Reference 78-16405-05