Cisco WS-C3560E-48PD-SF Command Reference - Page 257

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands macro description macro description Use the macro description interface configuration command to enter a description about which macros are applied to an interface. Use the no form of this command to remove the description. macro description text no macro description text Syntax Description description text Enter a description about the macros that are applied to the specified interface. Defaults This command has no default setting. Command Modes Interface configuration Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines Use the description keyword to associate comment text, or the macro name, with an interface. When multiple macros are applied on a single interface, the description text will be from the last applied macro. This example shows how to add a description to an interface: Switch(config-if)# macro description duplex settings You can verify your settings by entering the show parser macro description privileged EXEC command. Related Commands Command macro apply macro global macro global description macro name show parser macro Description Applies a macro on an interface or applies and traces a macro on an interface. Applies a macro on a switch or applies and traces a macro on a switch Adds a description about the macros that are applied to the switch. Creates a macro. Displays the macro definition for all macros or for the specified macro. 78-16405-05 Catalyst 3560 Switch Command Reference 2-225