Cisco WS-C3560E-48PD-SF Command Reference - Page 511

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show mls qos show mls qos Use the show mls qos user EXEC command to display global quality of service (QoS) configuration information. show mls qos [ | {begin | exclude | include} expression] Syntax Description | begin | exclude | include expression (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is an example of output from the show mls qos command when QoS is enabled and Differentiated Services Code Point (DSCP) transparency is disabled: Switch> show mls qos QoS is enabled QoS ip packet dscp rewrite is disabled This is an example of output from the show mls qos command when QoS is enabled and DSCP transparency is enabled: Switch> show mls qos QoS is enabled QoS ip packet dscp rewrite is enabled Related Commands Command mls qos Description Enables QoS for the entire switch. 78-16405-05 Catalyst 3560 Switch Command Reference 2-479