Cisco WS-C3560E-48PD-SF Command Reference - Page 567

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show vlan 1005 trnet 101005 1500 - - - ibm - 0 0 Remote SPAN VLANs Primary Secondary Type Ports Primary Secondary Type Ports 20 25 isolated Fa0/13, Fa0/20, Fa0/22, Gi0/1, 20 30 community Fa0/13, Fa0/20, Fa10/21, Gi0/1 20 35 community Fa0/13, Fa0/20, Fa0/23, Fa0/33, Gi0/1 Table 2-33 show vlan Command Output Fields Field VLAN Name Status Ports Type SAID MTU Parent RingNo BrdgNo Stp BrdgMode Trans1 Trans2 Remote SPAN VLANs Primary/Secondary/ Type/Ports Description VLAN number. Name, if configured, of the VLAN. Status of the VLAN (active or suspend). Ports that belong to the VLAN. Media type of the VLAN. Security association ID value for the VLAN. Maximum transmission unit size for the VLAN. Parent VLAN, if one exists. Ring number for the VLAN, if applicable. Bridge number for the VLAN, if applicable. Spanning Tree Protocol type used on the VLAN. Bridging mode for this VLAN-possible values are source-route bridging (SRB) and source-route transparent (SRT); the default is SRB. Translation bridge 1. Translation bridge 2. Identifies any RSPAN VLANs that have been configured. Includes any private VLANs that have been configured, including the primary VLAN ID, the secondary VLAN ID, the type of secondary VLAN (community or isolated), and the ports that belong to it. This is an example of output from the show vlan dot1q tag native command: Switch> show vlan dot1q tag native dot1q native vlan tagging is disabled 78-16405-05 Catalyst 3560 Switch Command Reference 2-535