Cisco WS-C3560E-48PD-SF Command Reference - Page 391

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show class-map show class-map Use the show class-map user EXEC command to display quality of service (QoS) class maps, which define the match criteria to classify traffic. show class-map [class-map-name] [ | {begin | exclude | include} expression] Syntax Description class-map-name | begin | exclude | include expression (Optional) Display the contents of the specified class map. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output are not displayed, but the lines that contain Output are displayed. Examples This is an example of output from the show class-map command: Switch> show class-map Class Map match-all videowizard_10-10-10-10 (id 2) Match access-group name videowizard_10-10-10-10 Class Map match-any class-default (id 0) Match any Class Map match-all dscp5 (id 3) Match ip dscp 5 Related Commands Command class-map match (class-map configuration) Description Creates a class map to be used for matching packets to the class whose name you specify. Defines the match criteria to classify traffic. 78-16405-05 Catalyst 3560 Switch Command Reference 2-359