Cisco WS-C3560E-48PD-SF Command Reference - Page 69

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands class-map Only one access control list (ACL) can be configured in a class map. The ACL can have multiple access control entries (ACEs). Examples This example shows how to configure the class map called class1 with one match criterion, which is an access list called 103: Switch(config)# access-list 103 permit any any dscp 10 Switch(config)# class-map class1 Switch(config-cmap)# match access-group 103 Switch(config-cmap)# exit This example shows how to delete the class map class1: Switch(config)# no class-map class1 You can verify your settings by entering the show class-map privileged EXEC command. Related Commands Command class match (class-map configuration) policy-map show class-map Description Defines a traffic classification match criteria (through the police, set, and trust policy-map class configuration commands) for the specified class-map name. Defines the match criteria to classify traffic. Creates or modifies a policy map that can be attached to multiple ports to specify a service policy. Displays QoS class maps. 78-16405-05 Catalyst 3560 Switch Command Reference 2-37