Cisco WS-C3560E-48PD-SF Command Reference - Page 748

memory Appendix A Catalyst 3560 Switch Boot Loader Commands memory Use the memory boot loader command to display memory heap utilization information. memory Syntax Description This command has no arguments or keywords. Command Modes Boot loader Command History Release 12.1(19)EA1 Modification This command was introduced. Examples This example shows how to display memory heap utilization information: switch: memory Text: 0x00700000 - 0x0071cf24 (0x0001cf24 bytes) Rotext: 0x00000000 - 0x00000000 (0x00000000 bytes) Data: 0x0071cf24 - 0x00723a0c (0x00006ae8 bytes) Bss: 0x0072529c - 0x00746f94 (0x00021cf8 bytes) Heap: 0x00756f98 - 0x00800000 (0x000a9068 bytes) Bottom heap utilization is 22 percent. Top heap utilization is 0 percent. Total heap utilization is 22 percent. Total bytes: 0xa9068 (692328) Bytes used: 0x26888 (157832) Bytes available: 0x827e0 (534496) Alternate heap utilization is 0 percent. Total alternate heap bytes: 0x6fd000 (7327744) Alternate heap bytes used: 0x0 (0) Alternate heap bytes available: 0x6fd000 (7327744) Table A-2 describes the fields in the display. Table A-2 memory Field Descriptions Field Text Rotext Data Bss Heap Description Beginning and ending address of the text storage area. Beginning and ending address of the read-only text storage area. This part of the data segment is grouped with the Text entry. Beginning and ending address of the data segment storage area. Beginning and ending address of the block started by symbol (Bss) storage area. It is initialized to zero. Beginning and ending address of the area in memory that memory is dynamically allocated to and freed from. A-14 Catalyst 3560 Switch Command Reference 78-16405-05