Cisco WS-C3560E-48PD-SF Command Reference - Page 778

debug ip igmp max-groups Appendix B Catalyst 3560 Switch Debug Commands debug ip igmp max-groups Use the debug ip igmp max-groups privileged EXEC command to enable debugging of Internet Group Management Protocol (IGMP) maximum groups events. Use the no form of this command to disable debugging. debug ip igmp max-groups no debug ip igmp max-groups Syntax Description This command has no arguments or keywords. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines The undebug ip igmp max-groups command is the same as the no debug ip igmp max-groups command. Related Commands Command show debugging Description Displays information about the types of debugging that are enabled. For syntax information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-18 Catalyst 3560 Switch Command Reference 78-16405-05