Cisco WS-C3560E-48PD-SF Command Reference - Page 534

show pagp Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show pagp Use the show pagp user EXEC command to display Port Aggregation Protocol (PAgP) channel-group information. show pagp [channel-group-number] {counters | internal | neighbor} [ | {begin | exclude | include} expression]] Syntax Description channel-group-number counters internal neighbor | begin | exclude | include expression (Optional) Number of the channel group. The range is 1 to 48. Display traffic information. Display internal information. Display neighbor information. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.1(19)EA1 12.2(25)SE Modification This command was introduced. The channel-group-number range was changed from 1 to 12 to 1 to 48. Usage Guidelines You can enter any show pagp command to display the active channel-group information. To display the nonactive information, enter the show pagp command with a channel-group number. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output are appear. Examples This is an example of output from the show pagp 1 counters command: Switch> show pagp 1 counters Information Flush Port Sent Recv Sent Recv Channel group: 1 Gi0/1 45 42 0 0 Gi0/2 45 41 0 0 2-502 Catalyst 3560 Switch Command Reference 78-16405-05