Cisco WS-C3560E-48PD-SF Command Reference - Page 512

show mls qos aggregate-policer Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show mls qos aggregate-policer Use the show mls qos aggregate-policer user EXEC command to display the quality of service (QoS) aggregate policer configuration. A policer defines a maximum permissible rate of transmission, a maximum burst size for transmissions, and an action to take if either maximum is exceeded. show mls qos aggregate-policer [aggregate-policer-name] [ | {begin | exclude | include} expression] Syntax Description aggregate-policer-name | begin | exclude | include expression (Optional) Display the policer configuration for the specified name. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is an example of output from the show mls qos aggregate-policer command: Switch> show mls qos aggregate-policer policer1 aggregate-policer policer1 1000000 2000000 exceed-action drop Not used by any policy map Related Commands Command mls qos aggregate-policer Description Defines policer parameters that can be shared by multiple classes within a policy map. 2-480 Catalyst 3560 Switch Command Reference 78-16405-05