Cisco WS-C3560E-48PD-SF Command Reference - Page 794

debug platform dot1x Appendix B Catalyst 3560 Switch Debug Commands debug platform dot1x Use the debug platform dot1x privileged EXEC command to enable debugging of 802.1x events. Use the no form of this command to disable debugging. debug platform dot1x {initialization | interface-configuration | rpc} no debug platform dot1x {initialization | interface-configuration | rpc} Syntax Description initialization interface-configuration rpc Display 802.1x initialization sequence debug messages. Display 802.1x interface configuration-related debug messages. Display 802.1x remote procedure call (RPC) request debug messages. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines The undebug platform dot1x command is the same as the no debug platform dot1x command. Related Commands Command show debugging Description Displays information about the types of debugging that are enabled. For syntax information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-34 Catalyst 3560 Switch Command Reference 78-16405-05