Cisco WS-C3560E-48PD-SF Command Reference - Page 557

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show storm-control show storm-control Use the show storm-control user EXEC command to display broadcast, multicast, or unicast storm control settings on the switch or on the specified interface or to display storm-control history. show storm-control [interface-id] [broadcast | multicast | unicast] [ | {begin | exclude | include} expression] Syntax Description interface-id broadcast multicast unicast | begin | exclude | include expression (Optional) Interface ID for the physical port (including type, module, and port number). (Optional) Display broadcast storm threshold setting. (Optional) Display multicast storm threshold setting. (Optional) Display unicast storm threshold setting. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines When you enter an interface-id, the storm control thresholds appear for the specified interface. If you do not enter an interface-id, settings appear for one traffic type for all ports on the switch. If you do not enter a traffic type, settings appear for broadcast storm control. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is an example of a partial output from the show storm-control command when no keywords are entered. Because no traffic-type keyword was entered, the broadcast storm control settings appear. Switch> show storm-control Interface Filter State Gi0/1 Forwarding Gi0/2 Forwarding Upper ---------20 pps 50.00% Lower --------10 pps 40.00% Current --------5 pps 0.00% 78-16405-05 Catalyst 3560 Switch Command Reference 2-525