Cisco WS-C3560E-48PD-SF Command Reference - Page 382

show auto qos Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show auto qos Use the show auto qos user EXEC command to display the quality of service (QoS) commands entered on the interfaces on which automatic QoS (auto-QoS) is enabled. show auto qos [interface [interface-id]] Syntax Description interface [interface-id] (Optional) Display auto-QoS information for the specified port or for all ports. Valid interfaces include physical ports. Command Modes User EXEC Command History Release 12.1(19)EA1 12.2(20)SE Modification This command was introduced. The information in the command output changed, and the user guidelines were updated. Usage Guidelines In releases earlier than Cisco IOS Release 12.2(20)SE, the show auto qos [interface [interface-id]] command output shows the initial generated auto-QoS configuration. In Cisco IOS Release 12.2(20)SE or later, the show auto qos command output shows only the auto-QoS command entered on each interface. The show auto qos interface interface-id command output shows the auto-QoS command entered on a specific interface. Use the show running-config privileged EXEC command to display the auto-QoS configuration and the user modifications. To display information about the QoS configuration that might be affected by auto-QoS, use one of these commands: • show mls qos • show mls qos maps cos-dscp • show mls qos interface [interface-id] [buffers | queueing] • show mls qos maps [cos-dscp | cos-input-q | cos-output-q | dscp-cos | dscp-input-q | dscp-output-q] • show mls qos input-queue • show running-config 2-350 Catalyst 3560 Switch Command Reference 78-16405-05