Cisco WS-C3560E-48PD-SF Command Reference - Page 823

Appendix B Catalyst 3560 Switch Debug Commands debug platform supervisor-asic debug platform supervisor-asic Use the debug platform supervisor-asic privileged EXEC command to enable debugging of the supervisor application-specific integrated circuit (ASIC). Use the no form of this command to disable debugging. debug platform supervisor-asic {all | errors | receive | send} no debug platform supervisor-asic {all | errors | receive | send} Syntax Description all errors receive send Display all supervisor-ASIC event debug messages. Display the supervisor-ASIC error debug messages. Display the supervisor-ASIC receive debug messages. Display the supervisor-ASIC send debug messages. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines The undebug platform supervisor-asic command is the same as the no debug platform supervisor-asic command. Related Commands Command show debugging Description Displays information about the types of debugging that are enabled. For syntax information, see the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. 78-16405-05 Catalyst 3560 Switch Command Reference B-63