Cisco WS-C3560E-48PD-SF Command Reference - Page 377
show access-lists, hardware counters | ipc, begin, exclude, rate-limit, exclude output
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 377 highlights
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show access-lists show access-lists Use the show access-lists privileged EXEC command to display access control lists (ACLs) configured on the switch. show access-lists [name | number | hardware counters | ipc] [ | {begin | exclude | include} expression] Syntax Description name number hardware counters ipc | begin | exclude | include expression (Optional) Name of the ACL. (Optional) ACL number. The range is 1 to 2699. (Optional) Display global hardware ACL statistics for switched and routed packets. (Optional) Display Interprocess Communication (IPC) protocol access-list configuration download information. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Note Though visible in the command-line help strings, the rate-limit keywords are not supported. Command Modes Privileged EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines The switch supports only IP standard and extended access lists. Therefore, the allowed numbers are only 1 to 199 and 1300 to 2699. This command also displays the MAC ACLs that are configured. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output are not displayed, but the lines that contain Output are displayed. 78-16405-05 Catalyst 3560 Switch Command Reference 2-345