Cisco WS-C3560E-48PD-SF Command Reference - Page 34

aaa accounting dot1x Chapter 2 Catalyst 3560 Switch Cisco IOS Commands Defaults AAA accounting is disabled. Command Modes Global configuration Command History Release 12.2(20)SE Modification This command was introduced. Usage Guidelines This command requires access to a RADIUS server. We recommend that you enter the dot1x reauthentication interface configuration command before configuring IEEE 802.1x RADIUS accounting on an interface. Examples This example shows how to configure IEEE 802.1x accounting: Switch(config)# aaa new-model Switch(config)# aaa accounting dot1x default start-stop group radius Note The RADIUS authentication server must be properly configured to accept and log update or watchdog packets from the AAA client. Related Commands Command aaa authentication dot1x aaa new-model dot1x reauthentication dot1x timeout reauth-period Description Specifies one or more AAA methods for use on interfaces running IEEE 802.1x. Enables the AAA access control model. For syntax information, see the Cisco IOS Security Command Reference, Release 12.2 > Authentication, Authorization, and Accounting > Authentication Commands. Enables or disables periodic reauthentication. Sets the number of seconds between re-authentication attempts. Catalyst 3560 Switch Command Reference 2-2 78-16405-05